SpecificationSheet: 8cm CD-R

• Right Reading, Positive, Emulsion UP
  
• Colour separated actual size. Everything that has to be black must be processed
  in black film, text film must be cut away on other films. (Except with black text)
  
• Screen angles - PMS spot colour tone should run at the same angle
  
• Full colour Cyan 75° Magenta 45° Yellow 0° Black 15°
  
• Screen Lines - 100 lines/inch graduated tint screen lines - 85 lines/inch
  
• Screen density - (min-max) 15-85%
  
• Screens - use round or elliptical screen points (no square points because of moiré)
  and deliver round inverted dot.
  
• Use 5 registration marks as shown on the diagram, place one in the centre and four and deliver round inverted dot.
  
• Pantone colour references should be clearly marked on each film.
  
• Artwork bleed - Artwork should not bleed off the edge
  
• Remove all key-lines (supply laser copy with key-lines if necessary)
  
• Reccommended minimum text size is Positive 4pt, Negative 4pt
  
• Recommended line thickness is Positive 0.10mm, Negative 0.20mm
  
• Please supply a match print or colour chromalin proof whenever colour is critical.
  
  July 2001