SpecificationSheet: CD-ROM
Supplying Films for printing of Labels/On body designs
Please
prepare films for printing the disc label according to the table shown below
Feature | Requirements |
Configuration | Positive Right leading, Emulsion Side Up |
Number of films per design | One film is required for each colour to be printed. Maximum colours = 6 |
Labeling films | Each film to include |
Quality | Type should be even |
Artwork
can be supplied in digital formats on CD-R/ZIP discs etc. and we will arrange
to have the films output. If you require this service please discuss it with
your normal contact.
Half Tone Designs
Feature | Requirements |
Screen Ruling | 100 lines per inch maximum (40 lines per cm) |
Highlights | Minimum 15% |
Shadow | Maximum 85% |
Screen | Elliptical dot |
Screen Angle | 1st screen colour
- 0 degrees 2nd screen colour - 30 degrees |
NOTE
Contrast can be increased by printing on to a solid background of a contrasting colour.
Spot colour - Text, Line Sizes and Types
Normal | Reversed Out | |
Line Width | Minimum 0.1 mm | Minimum 0.1 mm |
Type Size | Minimum 4 point | Minimum 4 point |
Font Styles | No Restriction | Fine fonts or Serifs of other fonts can result in line widths > the minimum |
Picture Prints or Designs using Process Colours (CMYK)
Feature | Requirements |
Screen Ruling | 100 lines per inch maximum (40 lines per cm) |
Highlights | Minimum 15% |
Shadows | Maximum 85% |
Screen Type | Elliptical dot |
Colour Reference | Cromalin, match print or similar to be supplied as colour reference. |
Screen Angles |
Background Colour | A white backgroung
is recommended and will be printed unless instructed otherwise. Text should not be reversed out of more the TWO colours. |
Reversed Out Text | A seperate layer of film for the text should be supplied so that this can be printed on top of the colours. This gives significant improvements to the image quality achieved. |
July 2001
©Copysoft Limited 2001